| |
Paste S1(S1 Paste)
DESCRIPTION S1 Paste is a multifunctional lubricant containing a combination of light solid l ubricants. The product is stringy, tacky and strongly adherent.-
PROPERTIES - extremely waterproof, both in hot water and steam
- resistant to water-based acids
- very adherent to all metals and all commonly used plastics
- reliable corrosion protection
- high load-carrying capacity
- prevents stick-slip
- reduces friction, wear and fretting corrosion
- very high compatibility with plastics, compatible with almost all plastics (with plastics which are very susceptible to stress cracking such as polycarbonates, polystyrenes and polymethacrylates, compatibility must be tested beforehand).
- - compatible with polar elastomers such as NBR, CR, ACM, FPM, Q and AU, etc.
- not compatible with nonpolar elastomers such as NR, SBR, BR, EPM and EPDM , etc.
TECHNICAL
DATA Basis : mixture of synthetic hydrocarbons with light solid lubricants
Colour : white
Base oil viscosity +40 °C : 440 mm2/s DIN 51 562
Density at 20 °C : 0.89 g/cm3 DIN 51 757
Flow pressure at -35 °C : 350 hPa DIN 51 805
Drop point : none DIN ISO 2176
NLGI-Klasse : 1 DIN 51818
Stability to liquifying
after 60,000 : 300-340 1/10 mm DIN ISO 2137
Protection against corrosion,
steel : DIN 51 802
Copper corrosion : 0 DIN 51 811
Operating temperature range: approx. -35 °C to +150 °C
APPLICATION - ideally suitable for plastic-metal lubrication
- long-term lubrication of domestic and office machinery and bottling and packaging plants in the food and consumer industry
- lubrication of joints, hinges and plain bearings under normal loading and sliding pairings in weapons technology
INSTRUCTIONS Before treating with S1 Paste, all surfaces must be clean and free from residues, dirt and moisture.
AVAILABLE
PACK SIZE LM S1 Paste 75 g tube Part no. 3604
200 g can with brush Part no. 3607
1 kg can Part no. 3605
25 kg hobbock Part no. 360 |
|
